@Stanislaw123 What @shberge said is true. VoIP providers always specify those port requirements, but you rarely need to open the ports. Firewall's all act the same out of the box because WAN is...

@RafaelBarddal When your modems are connected to the ER605, login to the Web Gui and check the following: 1. Network > Switch: Check each WAN port and verify the Duplex Mode is "Full-duplex" and...

@stealth23 ISPs will often set the modem speed higher that the advertised speed and will boost your speed if bandwidth use is low across their network. I also know some ISPs increased speeds during...

@stealth23 I have an ER605 v1 and a ISP Fiber connection (500 Mbps Down and 500 Mbps Up) and I always get the advertised speeds when doing wired speed tests. Return you ER605 back to the default MAC...

@SamikB For the instructions below I used ER605 V1 (Current Firmware) with the Web GUI, not Omada Controller: I also assumed the following: WAN-1 = Primary WAN WAN-2 = Backup WAN The instructions...

On my network I have two local DNS servers that get assigned via DHCP. The local DNS servers filter known malicious website, adult websites, and illegal downloads. If a DNS request is not for a local...