@d_j_w Is a hardware controller needed for this to work or do these even have the capability? No need a hardware controller. TP-Link EAP can forward the Multicast packets though there is no such...

@Alejandro9719 All I need is the incoming UDP traffic gets replied from the same WAN interface it came from. Try policy routing function, https://www.tp-link.com/en/support/faq/530/

@Lucas_IT I believe only the omada wifi 6 access point has WPA3 supported. https://www.tp-link.com/en/omada-wifi6/

@JSchnee21 I also just figured out (must have iOS14) that you can add and customize widgets on the Dashboard (-: Well, I can add and customize with my Windows laptop..

@agm65 Did you configure mail server? Send Test email to verify the mail server is configured successfully based on the faq below. https://www.tp-link.com/en/support/faq/2919/

@Emmanuelrr I need to reach another remote LAN, 10.0.1.0/24, that is attached and routed on the remote router 10.0.0.1 using address 10.0.1.1 . I would recommend to create another IPSEC LAN-to-LAN...