@Virgo I'm running 2.5 gig from the SFP+ WAN/LAN2 port with a 10 Gbps SFP ethernet module installed and it's working okay (managed with Omada OC200). My QNAP NAS says the interface is working at 2.5...

@Nlx I'm not an expert but I've searched the manual and can't find anything. Nearest I can get is the WAN ports in a multi-WAN setup can be configured as load sharing, but that's splitting, not...

@lazymongoose Okay. There's a thread over here that says your EAP245 V1 isn't compatible with the later versions of Omada... https://community.tp-link.com/en/business/forum/topic/236818?replyId=518718

@lazymongoose I've just ordered the TL-SG2210 to supplement my existing network that's managed by an OC200 controller. (hardware V2.0, Omada V5.9.32). Do you have to leave your OC200 on V3.2 for some...

@Philbert Thanks for the comment but a cheap 4-port switch is unlikely to have VLAN capability, therefore is probably not any more helpful than what I have now. Anyway, the PV inverter device is a...

@Philbert there are IoT devices that work below 100 Mbps that are quite happy to use a slow port which would then leave a fast 1Gbps port in the switch free for faster devices. For example, my Solar...