jthcomputersLV2Online
Following: 1Followers: 0
Forums/ Deco
2020-10-10 11:51:04
Re:Deco M9 plus speed capped at 100mbps on both wired and wireless
@GoncaloLuis Please check whether the router from which you are connecting to deco has a gigabit lan port or not?
0HELPFULS
Forums/ Deco
2020-10-10 11:48:43
Request to Clarify Status of Multiple Issues and Request Related to Deco Series
Dear TP Link There have been numerous issues and request that have been requested at the community for which no clarity has been given, I am listing a few of those issue I would request you to give...
2HELPFULS
Forums/ Deco
2020-10-06 06:06:29
Re:Latest firmware update - M5 disconnecting
@TomH83 if deco is not allowing you to change the ip in ap mode, then you can use address reservation in your plusnet router to give it static ip and also try increasing the dhcp lease period of the...
0HELPFULS
Forums/ Deco
2020-10-05 12:03:30
Re:Latest firmware update - M5 disconnecting
@TomH83 Give Static IP to your Main Deco M5, sometimes when dhcp lease expires from the router it is unable to renew which can cause this issue.
0HELPFULS
Forums/ Deco
2020-10-04 19:54:10
Re:Only changing one of my Deco M5s to be an access point
@smigs You need to create a separate network for your shed for the 4th Deco M5 to be able to work as access point. 1. Reset the 4th Deco M5 2. Open the Deco App-> Click on Create New Network 3....
0HELPFULS
Forums/ Deco
2020-09-29 09:04:49
Re:Deco M9 plus speed capped at 100mbps on both wired and wireless
@ankur3000 1. Why Have you set the QOS to 1024, if you internet connections is 250 MBPS then sit it to 250 MBPS Only for its proper functioning. 2. Check the patch cord connecting Modem to your Main...
2HELPFULS