@MarioDrone There has been an issue with the 2.4GHz signal range of AX73 v1 in the past, due to a FW update - details. However, I can't speculate if that's the case with the AX73 v2 latest FW...

@MarioDrone 2x AX73 should cover pretty well a 130 m2 premises if they are properly positioned and the walls are not a pre-cast concrete - details. You may consider connecting those two in Easymesh...

@Rich---- VX230v is a home xDSL modem router which has an Easyemsh implemented. EAP225 is part of the Omada solution hence -- Omada mesh. They are not compatible whith each other - details. To have...

@daws0n Check this document - in there you can see in which mode a different RE models can work. There are also a recommendations how to configure MAC filtering depending on the RE working mode.

@Serse Set MR200 wireless mode to 802.11n only for optimal performance. I would experiment with different static wireless channels to check if there's an improvement.- the wireless channel may...

@Rignus If you need more powerful router then use the BE25 as a main router with M5 connected with a wireless backhaul. This way you'll have a mesh and seamless roaming. C7 can be attached to one of...