@Jon_Heron Here's a thread which describes how to connect OneMesh capable router (like AX73) to an EasyMesh capable router (like AX55). AX55 just needs to be reset to its factory defaults before...

@Vito510 Unfortunately you'll always have one of the two bands (2.4GHz or 5 GHz) in High speed mode or both in Concurrent mode emitting locally, depending on these settings:

@SlySly How many devices you've addedd to the AX23 Address Reservation table ? I can see where the problem is with one of your PCs (Sly-dell-2-Pc) - it has two address reservations under the same...

@dtptp Check this KB regarding wireless SSID and password using special characters: " For Optimal Compatibility, We Would Recommend not using any Special Characters other than a Space in Your Network...

@JCHH It sounds like an IP address conflict - what's the Deco WAN IP address when you switch to router mode ? WAN and LAN IP address can't be within the same subnet. Here's how to change the Deco LAN...

@SlySly So the IP address that devices received from AX23 are within its DHCP server IP pool, but are not the ones you've set into the Address Reservation table ? Are these IP addresses (set into the...