@JohnMaravelo Similar behavior can be seen when on the network there's more than one DHCP server and their IP address pools are overlapping. I would suggest to change your addressing scheme and set...

@NatwanTilembar Check these units - https://www.aliexpress<dot>com/item/1005001855183032.html I am using similar for powering multiple switches or cameras - you can chose the voltage&power according...

@Ashley25 Archer C64 works great as an AP device - it has an 'AP mode' implemented and gigabit ports as well. It's newest FW release supports EasyMesh, which you could use in the future, if you...

@Mivado This shouldn't be possible with a TP-Link home router (they have limited features implemented), but just as a shot in the dark you can test this: The idea here is to isolate the hard-coded...

@khaledyounes Apparently WDS feature has been removed from VR600 v3. But since it's your main router, it would suffice that you configure WDS on your old router to get things going. WDS needs...

@JerInWI Disable QoS. Observe the Internet port negotiated speed here: If its on 100mbps then that's the culprit. Try setting this manually here: Then check again the negotiated speed shown the first...