@york146 Apparently this is a matter of firmware release and there's nothing to be done in this case. Usually this has been resolved by setting a static LAN IP address and turning the DHCP off.

@york146 This is a known behavior in AP mode - it's caused by the Smart DHCP feature. Make sure that the C80 DHCP server is set to OFF (not Auto).

@Lobao83 It could be many things. For start here's the Advanced > Status > Wireless (WDS status): Upon successful configuration your WDS status should be Running. Also, C60 LAN IP address should be...

@Lobao83 WPS won't work in this case. In order to use C60 as a wireless extender you shoud use this guide refering to the WDS feature

@TP-Joe So, did you reboot the router and check if this screen has changed and looks similar to what you expect:

@PCH Many routers support hairpinning (NAT loopback): Hairpinning is a network process where traffic from an internal network that is directed to the network's public IP address is instead...