I have a pair of TL-PA4020P powerline adaptors that appear to have stopped connecting. When plugged in, the power lights show OK and the local network connection light. However, they don't talk to eac

'm currently using a standard Plusnet Hub 2 on a FTTP installation. For various reasons, I'd like to be able to assign fixed IP addrssses to some of my hobby devices but the Hub 2 doesn't save these c

I'm hoping someone can help me think my way around this issue. I have a Raspberry Pi4 set up as a media centre running OSMC. My wifi router (Archer VR400 V3) is set up to assign it a fixed IP address

On my home network, I want to have some fixed IP addresses reserved for particular devices such as file server etc. I set these up in the Address Reservation table in Advanced Settings, with IP addres

Can anyone tell me how to enable port forwarding on the VR400 modem-router? I don't see any obvious settings for this.

I have a VR400 v3 router and also an RE315 Mesh range extender. The router is set up as a DHCP server to assign IP addresses in the range .1 to .99 on my local network, so that I can use addresses abo