SmutjeHannesLV1Online
Following: 0Followers: 0
Forums/ Switches
By Wonderland-club 2025-01-13 14:50:13

Configuring Network for both NDI and DANTE

Hello, i recently bought some network devices for a club: ER605, EAP255, TL-SG2008P. Router connected to switch, then from switch i connected: 2 PoE APs, 1 ArtNet Node, 1 Macbook for sending DMX and N
Forums/ Switches
By Clive_A 2024-07-23 03:07:07

How to Set Up QoS for Dante and Voice Protocols on Omada Switch

Background: This post provides a configuration guide to set up QoS on Omada Switch for Dante and voice-related protocols. This Article Applies to: Omada switches with the QoS feature. L2+ and L3 Switc
Forums/ Requests & Suggestions
By SmutjeHannes 2025-04-14 10:39:54

Limit DHCP adresses

Hey there, I would like to set up a DHCP server for a VLAN interface with ip address 192.168.200.1 and limit the DHCP addresses it serves from 192.168.200.100 to 192.168.200.254. Somehow I cant config
Forums/ Switches
By SmutjeHannes 2025-04-08 11:16:02

SG3428(UN) Ver:2.30 accidentally upgraded to wrong model firmware

Hey there, I'm a little confused.... On the back of my switch(es) it says model # SG3428(UN) Ver:2.30 In Omada controller I had a firmware upgrade available and now my switches are called TL-SG3428 v2