Deco M9 plus speed capped at 100mbps on both wired and wireless
Deco M9 plus speed capped at 100mbps on both wired and wireless
So I just got the deco M9 plus system yesterday because I was having coverage issues at my home and it seems to have fixed that which is great but I noticed something odd.
My Internet package is 250mbps download and upload and the maximum bandwidth I can get on the deco is always below 100mbps, on both wired and wireless. I tested this standing very close to primary deco and measured speed on phone and laptop on WiFi, also tried plugging in my laptop directly to the primary deco and also wirelessly in other locations in my home. When I disconnected the deco and plugged in my old router, I was getting the expected speeds (over 200mbps).
I have already set the total bandwidth in the QoS to 1024, with no high priority devices and set it on standard mode.
I tried changing the ethernet port on the deco that is connected to the modem, and the speeds went up to over 200mbps for maybe 15-20 minutes but when I checked again later, they were back down to below 100mbps.
Firmware is updated to the latest version, primary deco is connected directly to ISPs modem and secondary deco is quite close to the primary deco, no walls between them. All my speedtests have been with the speedtest built into the deco app as well as speedtest website/app.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ankur3000 For me it was the TOTAL BANDWIDTH SETTING under QoS in the app was set to 101Mbit.
For some obscure reason it can be limited, either automatically based on bandwidth test or manually by setting the Mbit.
- Copy Link
- Report Inappropriate Content
Same issue for me, it doesn't go over 100mbps on both wired and wireless even I have 500 mbps :(
- Copy Link
- Report Inappropriate Content
Welcome to the community.
Have you checked the speed might be capped by QoS?
If not, another possibility might be the WAN link speed of the main Deco which is limited to 100m/s for some reason.
Please check whether you have a broken Ethernet cable from the ISP modem to the main Deco.
Then please change a different Deco as the main Deco per this link to see if that made any difference:
How to Setup the Satellite Deco to be the Main Deco?
Wait for your reply.
- Copy Link
- Report Inappropriate Content
@ankur3000 same here, TP-Link was unable to solve it with my Deco M9 Plus with remote session. (Routers was 5 meters away from each other).
So I bought X90. And it is even worse than M9.
just find alterna
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9265
Replies: 14
Voters 0
No one has voted for it yet.