ER605 v2, the first SMB router that supports 4G/3G USB Modem function.

ER605 v2, the first SMB router that supports 4G/3G USB Modem function.

ER605 v2, the first SMB router that supports 4G/3G USB Modem function.
ER605 v2, the first SMB router that supports 4G/3G USB Modem function.
2022-01-28 07:23:16 - last edited 2023-10-12 11:56:32
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Hi Everyone,

 

We’re excited to announce the official launch of ER605 v2 here!

 

ER605 v2 is the first SMB router that supports 4G/3G USB Modem function, and adds the new features such as IPTV, DHCP Option 67 and DHCP Relay. With optimized chip scheme and improved processing performance, the ER605 v2 supports more concurrent session and higher IPsec VPN throughput compared to v1. Let's read on to learn more about this new product!

 

 

1. Appearance

 

The overall appearance and size of ER605 v2 are almost the same as ER605 v1, the main difference is that ER605 v2 adds a USB 2.0 interface and a USB LED indicator.

 

2. Hardware features

 

  • Five Gigabit RJ45 Ports: 1 Fixed WAN port, 2 Changeable WAN/LAN ports and 2 Fixed LAN ports.
  • Up to 3 WAN Ports: support load balance feature, which raises the utilization rate of multi-line broadband.
  • One USB WAN Port for Mobile Broadband: Mobile broadband via 4G/3G modem is supported for WAN backup.*
  • Durable metal casing and desktop/wall mounting design, suited for different environments.

 

Note: The actual rate of the USB WAN port is affected by the rate allocated by the Internet Service Provider and the performance of the 4G/3G USB Modem.

 

 

 

3. New features

Compared to the first hardware version of ER605, ER605 v2 has added the new features below.

 

(1) USB Modem

 

ER605 v2 adds a new USB2.0 interface, supports connection with 4G/3G USB Modem*, and performs WAN port link backup, which improves the stability of the router in certain scenarios. This is also the most important feature update of the v2 version.

 

*Check for 4G/3G USB Modem Compatibility List for ER605 V2, https://www.tp-link.com/en/er605/compatibility/

 

 

(2) OpenVPN

 

ER605 v2 supports to configure OpenVPN Server or OpenVPN Client in Standalone mode. ER605 v1 will add this function in the next firmware update.

 

 

(3) IPTV

 

ER605 v2 adds IPTV function back to enrich the use scene of the router, which can provide users with high-quality digital media information service. ER605 v1 will add this function in the next firmware update.

 

 

(4) DHCP Features

 

ER605 V2 adds the two DHCP features below:

  • Added DHCP Option 67. This field is used to inform the client of the configuration file’s name. It is one of the options used by the DHCP Auto install function.
  • Support DHCP Relay, which can be used as DHCP Server to assign IP addresses to clients on different network segments.

 

(5) Encryption algorithm of IPsec VPN

 

ER605 v2 adds SHA2 encryption to the IPsec VPN function and supports IKEv2, making VPN communication more secure. ER605 v1 will add this function in the next firmware update.

 

 

4. Comparison to ER605 V1

 

Due to the use of a new chip solution, ER605 v2 has significantly improved the maximum number of concurrent connections and IPsec VPN throughput compared to v1. Make v2 support more clients and a more powerful VPN forwarding function. The following is a detailed parameter comparison.

 

 

 

5. Application Scenarios

 

  • Used in conjunction with LTE 3G/4G USB Modem, it can support WAN backup. It is suitable for scenarios where WAN port link backup is required but there is only one wired link, which can improve the stability of the network.

 

  • Ensure the security of data transmission between multiple sites. One-click auto IPSec VPN greatly simplifies VPN configuration and facilitates network management and deployment. It also secures and encrypts private site-to-site data communications traveling over the internet.

 

 

  • Suitable for home users with computers and TVs, able to use the computer to surf the Internet while watching TV. The increase of IPTV functions can provide users with high-quality digital media information services.

 

 

 

--------------------------------------------------------------------------------------------------------------

 

Frequently Asked Questions

 

Q1: Can I use OpenVPN proxy to access the Internet?

No, currently OpenVPN does not support all data traffic to pass through the VPN tunnel, and you still need to go to the default gateway to access the Internet.

 

Q2: Has the number of clients supported by ER605 v2 increased?

YES, the Maximum number of concurrent connections of ER605 v2 has been increased from 25,000 to 150,000, so the recommended number of clients is about 100.

 

Q3: When the USB WAN port is enabled, can all functions related to the WAN port in the router be used?

In addition to being unable to serve as a VPN Server, other functions such as Access Control, Load Balancing, Bandwidth Control, NAT and other functions can all be normally selected for the USB WAN port.

 

Q4: In the IPTV function, what is the difference between Bridge Mode and Custom Mode?

In Bridge Mode, ISP doesn’t provide any info and doesn’t support IGMP protocol;

In Custom Mode, ISP provides all the configuration info like VLAN and priority.

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1      
  1      
#1
Options
19 Reply
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-02-18 16:22:46
Hi, when will be ER605 V2 in Europe available?
  4  
  4  
#2
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-03-08 01:37:59

Dear @Pawel12@nykr95,

 

Pawel12 wrote

Hi, when will be ER605 V2 in Europe available?

nykr95 wrote

Hi When is this V2 router going to be available?  I checked amazon and most outlets - I can't find it.

 

This thread is mainly aimed to introduce the features of the new product. I'm afraid that I don't have much detailed sales information for you.

 

Different region may have different sales strategy, you may contact the local agent for the actual arrival and sales status of ER605 V2.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-03-17 14:17:12

 Do we have a list of which USB 3/4G cards are supported? or have been tested?

  0  
  0  
#5
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-03-20 12:18:24

  @Fae looking forward to this being available.

  0  
  0  
#6
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-03-28 06:20:59

When will this be available for purchase? I can't find it anywhere :(

  0  
  0  
#7
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-03-28 14:29:24
Hi, In datasheet is specified that two ports are fixed LAN, these ports have a common dedicated switch chip or switching is provided by cpu? Thanks
  0  
  0  
#8
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-05-11 08:48:38

Really sorry to join "not related replies",

but IF anyone was able to buy that router from anywhere the world at all.

 

I am in Europe and official supplier even does not reply to my request if they have ER605 v2.

They updated their existing product in title with v1 SO not worth the reply but .. tweaked their existing offering to be not dealing with confusions.

 

My Mikrotik broke 2 days ago (probably capacitor after 10 years). I waited for that to switch to Omada Router combined with my existing APs and controller.

 

 

 

  0  
  0  
#9
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-05-15 17:53:25

  @drekinov I bought a ER605 last week from amazon in Europe and it's a V2

 

  5  
  5  
#10
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-07-09 15:04:46

Fae wrote

Q2: Has the number of clients supported by ER605 v2 increased?

YES, the Maximum number of concurrent connections of ER605 v2 has been increased from 25,000 to 150,000, so the recommended number of clients is about 100.

  @Fae 

100 clients for 150000 concurrent connections? really?

1500 concurrent connections (sessions) per user?

It seems a typo. Shouldn't be rather 1000 clients?

 

I use v1 with around 50-60 devices connected simultaneously and it can probably increase sometimes.

 

Or what does "client" mean? if not the connected devices...

  0  
  0  
#11
Options
Re:ER605 v2, the first SMB router that supports USB MiFi function.
2022-08-13 08:53:33
Just installed it. Great product, compliments! Just getting WAN Failover i.s.o. Load Balancing is a bit cryptic, took a few days experimenting to get the proper desired settings. Both need to be enabled to get WAN failover, but together with the needed WAN settings it leaves me with hundreds of possible configuration combinations of which a few realy work.
  1  
  1  
#12
Options