Drive doesn't show up in Device Manager

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Drive doesn't show up in Device Manager

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Drive doesn't show up in Device Manager
Drive doesn't show up in Device Manager
2022-03-22 02:30:41 - last edited 2022-03-24 00:48:57
Model: TG-3468  
Hardware Version: V4
Firmware Version:

Once that it wasn't any "setup.exe" in the adapter installation file, I tried to do it manually, as was advised. Unfortunately, when i opened the Device Manager, there were not any "TP-LINK" drive in the Network Adapters section. However, I know the drive was recognized, because I can use the internet when connected by the adapters hardware.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Drive doesn't show up in Device Manager-Solution
2022-03-22 06:21:31 - last edited 2022-03-24 00:48:57

Hello  @Leo_Carlos 

Please check if the adapter shows up under the Device manager-> Network adapter/Other device. It could be shown  as " TPLINK XX "  or " 802.11n/ac" or its chipset like " RTL/ RealteckXX" etc. 

 

 

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Drive doesn't show up in Device Manager-Solution
2022-03-22 06:21:31 - last edited 2022-03-24 00:48:57

Hello  @Leo_Carlos 

Please check if the adapter shows up under the Device manager-> Network adapter/Other device. It could be shown  as " TPLINK XX "  or " 802.11n/ac" or its chipset like " RTL/ RealteckXX" etc. 

 

 

Recommended Solution
  0  
  0  
#2
Options
Re:Drive doesn't show up in Device Manager
2022-03-22 16:55:25 - last edited 2022-03-22 16:56:49

  @Solla-topee just this ones

 

There are two "Realtek" but I don't have idea of which is the right one

  0  
  0  
#3
Options
Re:Drive doesn't show up in Device Manager
2022-03-23 01:11:43 - last edited 2022-03-23 01:12:19

Hello   @Leo_Carlos 

If you only got one ethernet adapter, try  to temporarily disable Realtek Family controller and see if the current Ethernet connection interrupts, if so that is TG-3468 adapter. 

  2  
  2  
#4
Options

Information

Helpful: 0

Views: 2659

Replies: 3

Related Articles