Tp link not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tp link not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tp link not working
Tp link not working
2022-09-04 11:13:20 - last edited 2022-09-05 07:06:26
Model: Archer C6  
Hardware Version: V3
Firmware Version: 3.20

Product updates some problem led light all blanking

  0      
  0      
#1
Options
1 Accepted Solution
Re:Tp link not working -Solution
2022-09-05 07:06:18 - last edited 2022-09-05 07:06:26

@K.balamurali 

 

Are you saying all the LEDs on the Archer C6 are blinking after you tried to upgrade the router firmware? If that is the case, please provide us with the below information:

1. What is the firmware version of your router and which version were you trying to upgrade to?

2. Do you still use the original power adapter? Was there any power cut or bad weather or firmware upgrading before it behaves abnormally? 

3. Try to hard reset it by holding the reset button or hole for 10s to see if the LEDs will become normal.

4. You can try TFTP firmware recovery to see if you can bring it alive:

https://community.tp-link.com/en/home/stories/detail/582

5. When and where did you buy this also? If nothing can make it work properly, you may need to contact the local tech support to check the warranty cause the device seems faulty:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Tp link not working -Solution
2022-09-05 07:06:18 - last edited 2022-09-05 07:06:26

@K.balamurali 

 

Are you saying all the LEDs on the Archer C6 are blinking after you tried to upgrade the router firmware? If that is the case, please provide us with the below information:

1. What is the firmware version of your router and which version were you trying to upgrade to?

2. Do you still use the original power adapter? Was there any power cut or bad weather or firmware upgrading before it behaves abnormally? 

3. Try to hard reset it by holding the reset button or hole for 10s to see if the LEDs will become normal.

4. You can try TFTP firmware recovery to see if you can bring it alive:

https://community.tp-link.com/en/home/stories/detail/582

5. When and where did you buy this also? If nothing can make it work properly, you may need to contact the local tech support to check the warranty cause the device seems faulty:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support 

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 163

Replies: 1

Related Articles