Policy Routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Policy Routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Policy Routing

Miletos

2023-04-24 03:32:56 - last edited 2023-04-24 03:36:51

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-01-15

Policy Routing

2023-04-24 03:32:56 - last edited 2023-04-24 03:36:51

Tags:

Model: OC200

Hardware Version: V1

Firmware Version: 5.7.6

Hello,

I have an ER605 with two WAN connections and I would like to use WAN1 for the wired network and WAN2 for WiFi.

To do this, I created VLAN 20 and configured the SSID to use VLAN 20. Additionally, I configured Policy Routing for All Protocols, WAN2, Source (Network) WiFi, and Destination IPGroup_Any.

However, I am facing a problem: when the "Use the other WAN port if the current one is down" option is unchecked, everything works fine. But when I check this option, all traffic is routed through WAN1 instead of WAN2, even if WAN2 is online.

Could I be forgetting something?

WAN1 = WAN

WAN2 = WAN/LAN1

ER605 V2 2.1.2

OC200 V1 1.21.7 Build 20221206 Rel.58608 - 5.7.6

1 Reply

d0ugmac1

LV5

2023-04-24 13:25:56

Posts: 2125

Helpful: 776

Solutions: 193

Stories: 0

Registered: 2022-03-05

Re:Policy Routing

2023-04-24 13:25:56

@Miletos

This might actually be part of a bug that others are reporting in various forms. Can you try configuring a 3rd WAN port and use WAN3 instead of WAN2? (ie you will have 3 WAN ports defined, and only use WAN and WAN2 and WAN1 will be disconnected (but still defined, make it DHCP if previously defined as static)

<< Paying it forward, one juicy problem at a time... >>

Policy Routing

Policy Routing

Information

Voters 0

Tags