Beta Software ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
This Article Applies to:
ER605(UN) V2 2.2.3_Build 20240112 (Beta)
Release Notes:
New Features & Enhancements:
1. Add support for Deep Packet Inspection.
2. Optimized logic for Auto IPsec to select WAN port.
Bug Fixed:
1. Fixed several security vulnerabilities.
2. Fixed the bug of slow speed of IPsec VPN.
Firmware Download:
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways
Firmware Download Link
ER605(UN) V2_2.2.3_Build 20240112 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2/2.6.
(2) Your device’s configuration won’t be lost after upgrading.
(3) Please make sure the firmware version before upgrading is ER605(UN)_V2_2.2.3 Build 20231201, otherwise the firmware upgrade will fail.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the ER605 router upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your ER605 router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Emergency Mode to recover the firmware for Omada Gateways
Update Log:
Jan 12th, 2024:
Release of this post.
Recommended Threads:
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Actually, the same thing is happening to me about the IPv6 implementation of ER605 v2. Since the 2.1.4 beta update (I am currently on the latest 2.2.3 beta firmware), I noticed that my ER605 v2 has been converting my /56 WAN IPv6 I am getting from my ISP's bridged GPON ONT to a /64 prefix. The effect of this is it is sometimes difficult to obtain WAN IPv6 from my ISP.
I am sure that my ISP is giving a /56 prefix since I have checked the WAN configs of my ISP's GPON ONT before bridging it. And besides, my ISP is only giving a /56 prefix to all its subscribers.
Here are the photos:
- Copy Link
- Report Inappropriate Content
IP-statistics:
It would be helpful if the WAN used was also displayed next to the application (WAN1 / WAN2 / ...)
Best regards
- Copy Link
- Report Inappropriate Content
Yes, the IPv6 prefix is handed out by my ISP.
From the controller (version 5.13.23) logs one can see that the prefix is acquired correctly but dropped after a short while:
01-22-2024 12:15:08.780 INFO [manage-inform-work-group-0] [] c.t.s.o.m.d.d.m.i.o.UpdateOsgImagePortCommonInfoService(): interfaceNetwork ListableSiteComponentId(id=<REDACTED>) prefix change to 2a02:<REDACTED>:<REDACTED>:<REDACTED>::/59.
01-22-2024 12:15:09.031 WARN [manage-inform-work-group-0] [] c.t.s.o.m.d.d.m.m.s.e(): settingMap[false] or macSet[true] or omadacId[false] is empty
01-22-2024 12:15:28.859 INFO [manage-inform-work-group-8] [] c.t.s.o.m.d.d.m.i.o.UpdateOsgImagePortCommonInfoService(): interfaceNetwork ListableSiteComponentId(id=<REDACTED>) prefix 2a02:<REDACTED>:<REDACTED>:<REDACTED>::/59 change to .
From the technical interface description of my ISP:
As described this works fine for about 30 seconds but then the ER605 drops the assignement.
- Copy Link
- Report Inappropriate Content
Hello,
du you use a cable modem FritzBox 6591 in Bridge Mode with Vodafone Cable Internet same me?
I have a Vodafone 1 GBit private contract with a full IPv4 address, no DSLite.
I only activate IPv4 in my ER605 v2_2.2.3 Build 20240112.
I'm not sure but i think you got only 1 IPv4 and 1 IPv6 address from Vodafone.
The IPv6 address is reserved for the FritzBox (Comfort Option / IP Phone) and you can't use with your own router.
Greetings, Thorsten
- Copy Link
- Report Inappropriate Content
Hi @Lugiano
Thanks for posting in our business forum.
Lugiano wrote
IP-statistics:
It would be helpful if the WAN used was also displayed next to the application (WAN1 / WAN2 / ...)
Best regards
I am not sure what you are referring to. Please always add pictures for illustration. IP Statistics, so you refer to this as standalone mode? System Status > Traffic Statistics?
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
ceejaybassist wrote
Actually, the same thing is happening to me about the IPv6 implementation of ER605 v2. Since the 2.1.4 beta update (I am currently on the latest 2.2.3 beta firmware), I noticed that my ER605 v2 has been converting my /56 WAN IPv6 I am getting from my ISP's bridged GPON ONT to a /64 prefix. The effect of this is it is sometimes difficult to obtain WAN IPv6 from my ISP.
I am sure that my ISP is giving a /56 prefix since I have checked the WAN configs of my ISP's GPON ONT before bridging it. And besides, my ISP is only giving a /56 prefix to all its subscribers.
Here are the photos:
A team member called me regarding your issue. So this is DHCP and you are getting a fixed IP from the ISP so it has nothing to do with the prefix delegation you set in the Internet settings. That's why it does not match in two pictures you showed.
- Copy Link
- Report Inappropriate Content
@Clive_A So my ISP is giving me a static IPv6 address?
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
ceejaybassist wrote
@Clive_A So my ISP is giving me a static IPv6 address?
Not really. So when you request the IP from the ISP, it disregards that prefix delegation. If the ISP gives you /64, it will not match what you set in the prefix delegation. I mean the ISP is arbitrary in this situation.
- Copy Link
- Report Inappropriate Content
@Clive_A So it is a normal behavior? But how come every time I reboot, it doesn't obtain a WAN IPv6 automarically? I had to manually release and renew it to be able to obtain a WAN IPv6 from my ISP/
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
ceejaybassist wrote
@Clive_A So it is a normal behavior? But how come every time I reboot, it doesn't obtain a WAN IPv6 automarically? I had to manually release and renew it to be able to obtain a WAN IPv6 from my ISP/
From the tongue of the team, it seems to be expected.
Have you tried to use /64? Every time you have to manually gain the IPv6, so after the reboot, does it get an IPv6? Or it is blank?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 6856
Replies: 31