1
Votes

Introduce "ultra high sensitivity" mode for Tapo T315

 
1
Votes

Introduce "ultra high sensitivity" mode for Tapo T315

Introduce "ultra high sensitivity" mode for Tapo T315
Introduce "ultra high sensitivity" mode for Tapo T315
2024-08-06 13:27:43 - last edited 2024-08-22 11:46:03
Model: Tapo T315  
Hardware Version: V1
Firmware Version: 1.8.0 Build 230921 Rel.091446

Tapo T315 currently offers two operation modes:

 

  • Balanced: update data when the temperature/humidity change is greater than 0.5°C/6%.
  • High sensitivity: update data when the temperature/humidity change is greater than 0.3°C/3%.

 

It would be great to have a "ultra high sensitivity" mode that would update data when the temperature/humidity changes is greater than or equal to, let's say, 0.1°C/1%. Surely this would consume more battery, but some users like me would probably benefit from this feature. 

 

I currenty have a few T315s paired with P110s for controlling dehumidifiers in my apartment, and the 3% change in humidity usually causes the dehumidifiers to run longer than needed. So a "ultra high sensitivity" mode would probably be a good fit in this scenarios. 

#1
Options
1 Reply
Re:Introduce "ultra high sensitivity" mode for Tapo T315
2024-09-09 10:59:59

  @cmolin I aggre. And the humidity displays tenth of % but it only changes by 1 %. I would be nice to have 0,1 % or atlest 0,5 % humidity resolution. 

I just tried to calibrate the sensors and temperature is spot on, but the humidity is out of the specification of ± 2 % RH at 60 %RH as specified in the renge from 20 % - 80 % RH, it was 2,8 % RH. Is there an option to make adjustment?

#2
Options