Termohlavice + semzor
Good morning. I want to ask. I have a Kasa KE 100 thermal head installed. This thermal head is connected to a Tapo T310 temperature sensor. So this sensor should regulate the temperature of the thermal head. Unfortunately, this does not happen. The thermal head always shows a higher temperature than the sensor. See photo attachment. Please explain. why is that? I thought that if they are connected in such a way, when I set the thermal head to e.g. 24 degrees, the thermal head will be open as long as there is 24 degrees on the thermal head sensor? Am I understanding this correctly? Thank you in advance for your reply
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Have you set the temperature correction? KE100 Device Settings -> Temperature Correction -> Choose "Designated Sensor".
- Copy Link
- Report Inappropriate Content
Have you set the temperature correction? KE100 Device Settings -> Temperature Correction -> Choose "Designated Sensor".
- Copy Link
- Report Inappropriate Content
@Wayne-TP Good morning. I set the correction. Because I have the temperature from the T310 sensor. I would also like to know if I set that I want to have 22 degrees in the apartment, at what temperatures does the head turn on and at which does it turn off? It seems to us that it turns off already at 21.5 degrees and turns on when it drops below 21 degrees. Calibration has been performed.
- Copy Link
- Report Inappropriate Content
The KE100 will only be fully closed when it is in "Sleep mode -- Fully closed". At other times, the valve adjusts its opening ratio according to the set target temperature, which is a dynamic change, and the actual temperature fluctuates above and below the target value.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 203
Replies: 3
Voters 0
No one has voted for it yet.