TP-Link TL-SG105 won't go past 1000 mbit/s

TP-Link TL-SG105 won't go past 1000 mbit/s

TP-Link TL-SG105 won't go past 1000 mbit/s
TP-Link TL-SG105 won't go past 1000 mbit/s
2024-10-11 08:18:58 - last edited 2024-10-14 09:16:58

I have connected router and 2 PCs to TP-Link TL-SG105 and one of the PCs keep getting steady 1000 mbit/s as it should, but the other PC gets only 100 mbit/s. When switching slots, the other PC gets to 1000 mbit/s for little bit before going back down to 100 mbit/s. The cable is CAT6e and it's a new cable, so there shouldn't be anything wrong with it.

  0      
  0      
#1
Options
1 Accepted Solution
Re:TP-Link TL-SG105 won't go past 1000 mbit/s-Solution
2024-10-11 16:24:02 - last edited 2024-10-14 09:16:58

  @Ma7901 

 

If you have another spare cable of a good quality make a test with it. CAT 5E is enough for 1000 mbps bandwidth.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:TP-Link TL-SG105 won't go past 1000 mbit/s-Solution
2024-10-11 16:24:02 - last edited 2024-10-14 09:16:58

  @Ma7901 

 

If you have another spare cable of a good quality make a test with it. CAT 5E is enough for 1000 mbps bandwidth.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options