Smart Home Community > Tapo Smart Light Bulb > L630 Bulb Colour Default
< Tapo Smart Light Bulb

L630 Bulb Colour Default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

L630 Bulb Colour Default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
L630 Bulb Colour Default
L630 Bulb Colour Default
2024-11-06 19:18:23 - last edited 2024-11-08 15:42:35
Model: Tapo L630  
Hardware Version:
Firmware Version:

Hi,

 

I have 2 x L630 Smartbulbs which appear to be working fine with a schedule to turn them on\off depending on the time of day. However, each time they switch on they default to a bright white colour at 50% brightness.

 

i change them to an off-white colour and reduce the brightness to 25%, however, next time they switch on they return to bright white and 50% brightness.

 

Both are running the latest firmware, and both bulb sockets are wired to a permanent non-switched live so I know they're not losing power when they're scheduled off..

 

Any ideas??

 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:L630 Bulb Colour Default-Solution
2024-11-08 07:22:54 - last edited 2024-11-08 15:42:35

  @BlueyVIII 

 

Check the light settings on the schedule, that's where you can decide what color and brightness of the light bulb when it is turned on by schedule.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
Re:L630 Bulb Colour Default-Solution
2024-11-08 15:49:21 - last edited 2024-11-11 07:27:12
Nice one! Sorted it... I had the automation to "control multiple devices", and that doesn't have a setting for changing the colour/brightness. Using Multiple Devices in the automation only provides for on/off I changed the automation to "control one device" and that gives the option to "Turn On and customize lighting"... I had to do this for each bulb (luckily I only have 2) and it works fine. Thanks for your help...
Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:L630 Bulb Colour Default-Solution
2024-11-08 07:22:54 - last edited 2024-11-08 15:42:35

  @BlueyVIII 

 

Check the light settings on the schedule, that's where you can decide what color and brightness of the light bulb when it is turned on by schedule.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
Re:L630 Bulb Colour Default-Solution
2024-11-08 15:49:21 - last edited 2024-11-11 07:27:12
Nice one! Sorted it... I had the automation to "control multiple devices", and that doesn't have a setting for changing the colour/brightness. Using Multiple Devices in the automation only provides for on/off I changed the automation to "control one device" and that gives the option to "Turn On and customize lighting"... I had to do this for each bulb (luckily I only have 2) and it works fine. Thanks for your help...
Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 768

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.