L530B wont change colour

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

L530B wont change colour

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
L530B wont change colour
L530B wont change colour
2024-11-18 19:21:20 - last edited 2025-01-15 07:04:39
Model: Tapo L530B  
Hardware Version: V3
Firmware Version: 1.1.9

Purchased the L530B light bulb and have connected it through the app succesfully. When using the app i can turn the light on or off, to regular light or a bright white and can control the brightness. However whenever i select a colour to change it to, it will, just dim down the regular light colour or go to basically off.

 

I have tried to soft reset the device by turning it on and off three times which didnt help. Then factory reset with 5 restarts and then setting removing and up the device on the app again but these have had no effect.

 

Specifically bought this bulb so i could manage the colour of the bulb so I might as well send it back if this is going to continue, as its something ive seen multiple people post about but without a resolution.

  0      
  0      
#1
Options
1 Accepted Solution
Re:L530B wont change colour-Solution
2024-11-20 07:11:57 - last edited 2025-01-15 07:04:39

  @DownDog12 

 

Past feedback indicates that these problems may stem from using the bulb in an incompatible voltage circuit. To ensure proper functionality, please check the product specifications on the packaging and verify whether the smart bulb can be used in your circuit. 

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:L530B wont change colour-Solution
2024-11-20 07:11:57 - last edited 2025-01-15 07:04:39

  @DownDog12 

 

Past feedback indicates that these problems may stem from using the bulb in an incompatible voltage circuit. To ensure proper functionality, please check the product specifications on the packaging and verify whether the smart bulb can be used in your circuit. 

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options