Connectivity
hi. The lights don't stop beeping. I cant connect to the device's wifi network. Pls help..... I tried to restart the device but its not helping.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Are you saying all the lights on the RE200 are constantly blinking and never stop?
Was your RE200 working fine previously or is this a brand new RE200 that never worked?
Have you already tested the RE200 in another wall socket in another room?
Also verify that the small "Reset" button is feeling like a switch when you operate it. (a Reset button that has got stuck in the pressed-in position could cause problems)
- Copy Link
- Report Inappropriate Content
Hi@Tebatso,
Thank you for contacting our community.
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to RE220/RE200/RE190 Keeps Restarting Automatically for further suggestions.
If still same, please contact local support.
- Copy Link
- Report Inappropriate Content
Hi,
Are you saying all the lights on the RE200 are constantly blinking and never stop?
Was your RE200 working fine previously or is this a brand new RE200 that never worked?
Have you already tested the RE200 in another wall socket in another room?
Also verify that the small "Reset" button is feeling like a switch when you operate it. (a Reset button that has got stuck in the pressed-in position could cause problems)
- Copy Link
- Report Inappropriate Content
Hi@Tebatso,
Thank you for contacting our community.
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to RE220/RE200/RE190 Keeps Restarting Automatically for further suggestions.
If still same, please contact local support.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 110
Replies: 2
Voters 0
No one has voted for it yet.