Reset mode for Tapo Bulbs

Is there any way to change the reset for tapo bulbs ? Turning on and off for 3 times is ridiculous if there is no maximum time to do it , today my power company disconnected the power several times in the morning but not consecutively, I found myself all the lamps offline reset , this is ridiculous , it would be enough to insert a time Limit of 10 seconds to end the reset sequence to not have these problems
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content

Resetting a Tapo smart bulb has specific requirements: the interval between turning it on and off should be 1 second. Typically, a power cut won’t reset the bulb. However, unexpected outages, such as large-scale power interruptions in an apartment, house, or community, can change this. When power is suddenly restored, fluctuations in the electrical grid can occur. Despite the bulb not lighting up due to low voltage sometimes, its power is actually connecting and disconnecting rapidly within a very short timeframe (like a second or millisecond), which triggers the reset mechanism.
If power outages frequently occur in your home, consider installing protective devices on your circuit, such as those that can delay the appliance's power supply after the power is restored.
- Copy Link
- Report Inappropriate Content

Hi again! I have some good news to share. Our product team are planning to update the reset method for the Tapo smart bulb. This new change should help to improve the situation where the bulb gets reset due to an unstable power supply. We are also offering community users an early opportunity to try it out. If you're interested, please refer to the details below.
- Copy Link
- Report Inappropriate Content

Resetting a Tapo smart bulb has specific requirements: the interval between turning it on and off should be 1 second. Typically, a power cut won’t reset the bulb. However, unexpected outages, such as large-scale power interruptions in an apartment, house, or community, can change this. When power is suddenly restored, fluctuations in the electrical grid can occur. Despite the bulb not lighting up due to low voltage sometimes, its power is actually connecting and disconnecting rapidly within a very short timeframe (like a second or millisecond), which triggers the reset mechanism.
If power outages frequently occur in your home, consider installing protective devices on your circuit, such as those that can delay the appliance's power supply after the power is restored.
- Copy Link
- Report Inappropriate Content

Hi again! I have some good news to share. Our product team are planning to update the reset method for the Tapo smart bulb. This new change should help to improve the situation where the bulb gets reset due to an unstable power supply. We are also offering community users an early opportunity to try it out. If you're interested, please refer to the details below.
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 435
Replies: 2
Voters 0
No one has voted for it yet.