QoL S200 event log

As you see for rotated anticlockwise, the name of automation is missing under action in event log.
Automation:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
S200 button event log issue and local automation issue for anticlockwise and clockwise in the same automation have been resolved by the Tapo support with new firmware for my H100 hub.
- Copy Link
- Report Inappropriate Content
Did the automation run correctly when triggered by the rotated anticlockwise?
PS: Why would you put both clockwise and counterclockwise rotation of the same button into the same automation trigger? I'm confused.
- Copy Link
- Report Inappropriate Content
yes, automation is working correctly, it's only name missing
why? so I don't have to guess which way is to turn on light haha
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
It's all the time in event logs, but only if anticlockwise and clockwise are used in the same automation for the same button.
Edit: I found another bug, if you have rotate clockwise and anticlockwise for the same button in the same automation then one trigger won't work locally with hub h100 even if automation is marked as under hub control, it's that trigger which is missing a name of automation in event log:
H100 firmware:
Videos:
https://drive.google.com/file/d/1wrXD1gSvj5kO7SI6BiI-GBy82qwWy_n3/view?usp=drivesdk
https://drive.google.com/file/d/1HrISGYgGJw-sRoQP2ylkhAp_dIRV99l_/view?usp=drivesdk
https://drive.google.com/file/d/1_7Iq619sdDx-GjvaB4_Bma-_Rno7JG8J/view?usp=drivesdk
Here example when clockwise and anticlockwise are used in different automations, same button:
- Copy Link
- Report Inappropriate Content
I don't want to open a new thread.
I can't add double tap anymore into new automations, I'm sure it's an issue with the newest app version, because I could have used it before.
Check videos:
https://drive.google.com/file/d/1s5-As5LioMseeyYZm2pnnK0ky80tTzld/view?usp=drivesdk
Double tap is on for all buttons:
https://drive.google.com/file/d/1wqslej1-obyZpuqUQBj5bw3bofKws0xG/view?usp=drive_link
- Copy Link
- Report Inappropriate Content
To assist with this case, a specialist will help to follow it up through email. Please check your inbox later to confirm.
If the email you used to register for the TP-Link community is not your contact email or you cannot access it, please send me your contact email through private message.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
S200 button event log issue and local automation issue for anticlockwise and clockwise in the same automation have been resolved by the Tapo support with new firmware for my H100 hub.
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 470
Replies: 8
Voters 0
No one has voted for it yet.