Home Network Community > Deco > Using a static IP on Deco X60, gives strange problems
< Deco

Using a static IP on Deco X60, gives strange problems

Using a static IP on Deco X60, gives strange problems

Using a static IP on Deco X60, gives strange problems
Using a static IP on Deco X60, gives strange problems
3 weeks ago - last edited 2 weeks ago
Model: Deco X60  
Hardware Version:
Firmware Version:

Hi,

 

I have a very strange issue and i think is a problem with the deco. 

Setting a static ip address on the wifi of my s24 ultra works for a couple of seconds and then it stops for almost the same amounts of time. It keeps doing this over and over. So, works and than it does not work...

If i setup as dhcp, everything okay.thoughts?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Using a static IP on Deco X60, gives strange problems-Solution
3 weeks ago - last edited 2 weeks ago

  @albgen 

Hi, thanks for the update.

I think you can manually set an IP out of the DHCP range, such as 10.6.8.49/255.255.255.0, in case Deco might assign 10.6.8.57 to another local device.

The LAN subnet mask is 22/255.255.252.0. While on the Samsung phone, it is better to use /24 prefix.

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#6
Options
6 Reply
Re:Using a static IP on Deco X60, gives strange problems
3 weeks ago

  @albgen 

Hi, did you manually set a static IP address or via Address Reservation on the Deco?

If it were a manually-configured IP, is it out of the DHCP range?

 

Can I also have the firmware version of the Deco X60?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Using a static IP on Deco X60, gives strange problems
3 weeks ago

  @David-TP set up manually on the wireless network.

The ip is within the range of the dhcp of deco.

The firmware is the latest available on the app.

 

  0  
  0  
#3
Options
Re:Using a static IP on Deco X60, gives strange problems
3 weeks ago

  @albgen 

  0  
  0  
#4
Options
Re:Using a static IP on Deco X60, gives strange problems
3 weeks ago - last edited 3 weeks ago

  @albgen You can use ip address 192.168.70.1 and subnet mask 255.255.252.0 and DHCP ip address range 192.168.68.50 and 192.168.71.250

Please & Thank You !! ❤️
  1  
  1  
#5
Options
Re:Using a static IP on Deco X60, gives strange problems-Solution
3 weeks ago - last edited 2 weeks ago

  @albgen 

Hi, thanks for the update.

I think you can manually set an IP out of the DHCP range, such as 10.6.8.49/255.255.255.0, in case Deco might assign 10.6.8.57 to another local device.

The LAN subnet mask is 22/255.255.252.0. While on the Samsung phone, it is better to use /24 prefix.

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#6
Options
Re:Using a static IP on Deco X60, gives strange problems
a week ago

  @David-TP had another device with the same ip address and that was the issue.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 142

Replies: 6

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.