KE110 and connected TRV not following schedule, not following open window detection rules
KE110 and connected TRV not following schedule, not following open window detection rules
I switched my complete heating system from Netatmo to TP-Link Kasa products this season and so far I'm very satisfied.
I also got two KE110 for the two biggest rooms, one bound to one TRV and one to three.
I'm experiencing the phenomenon where the two rooms with the KE110 don't follow the smart schedule. The app correctly shows the next time-slot but when the time comes, the temperature doesn't change. It happens not always but at least once a day so far.
Disabling and enabling the smart control usually helps. And sometimes it displays "Hold Temperature" except I didn't do any manual changes.
I also connected one Tapo T110 Window Sensor and bound it to the KE110. The Sensor works and detects the opening, but the KE110 doesn't always follow the set rules either.
All of these problems only happen with the KE110. The single TRVs work flawlessly, also with T110 sensors. Anyone else having these issues?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have the same problem with my KE110. But in my case it never followed the smart control schedule and the app shows incorrect time for the next change (1 hour earlier).
I've already tried to reset and reconnect both KE110 and the TVR I'd like to control with it.
TVRs not bound to the KE110 follow smart schedule without any issuses.
- Copy Link
- Report Inappropriate Content
i have exactly the same problem with the ke110!
and also sometimes the ke110 not even activate my manually change temperature . So I have 2 problems with the ke110
- Copy Link
- Report Inappropriate Content
FYI: I'm in contact with a higher up support level and we've been testing different firmware for the past two weeks, so they're working on it 
- Copy Link
- Report Inappropriate Content
jmaciej7 wrote
I have the same problem with my KE110. But in my case it never followed the smart control schedule and the app shows incorrect time for the next change (1 hour earlier).
I've already tried to reset and reconnect both KE110 and the TVR I'd like to control with it.
TVRs not bound to the KE110 follow smart schedule without any issuses.
Does this occur if you have adjusted the temperature manually previously? Did you enable the Hold feature?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 452
Replies: 14
Voters 0
No one has voted for it yet.