Smart Home Community > Tapo Smart Light Bulb > Speed of automation?
< Tapo Smart Light Bulb

Speed of automation?

Speed of automation?

Speed of automation?
Speed of automation?
a week ago - last edited a week ago
Tags: #Smart Actions
Model: Tapo L630  
Hardware Version: V1
Firmware Version: 1.1.2

Hi there,

 

I have set up a process whereby if my doorbell senses movement between sunset and sunrise it switches on a L630 spotlight located in the porch (located above the doorbell) for 3 minutes - however the lag between the doorbell sensing movement and turning on the light is too much (>5 seconds) for this to be a practical solution.

 

Is there anyway to speed this up? If I use the app to turn on the light manually it is instant, so I don't believe it is a WIFI speed issue.

 

Thanks

  0      
 
  0      
 
#1
Options
3 Reply
Re:Speed of automation?
a week ago
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:Speed of automation?
Monday

  @Wayne-TP Thanks for the tip but unfortunately none of them helped. It is a strange one, as the doorbell immediately senses movement and the light will immediately turn on manually through the app, however, the doorbell can't get the bulb to immediately turn on. Both bulb and doorbell have a strong connection to the WIFI (as does the Hub H200).

  0  
  0  
#3
Options
Re:Speed of automation?
Thursday - last edited Thursday

  @Intecofreds 

 

What's the device signal strength (RSSI rate) of the doorbell and the L630 bulb? 

 

How many devices do you have on the router's 2.4GHz WiFi? You may want to check the number of 2.4GHz devices currently connected to your router, verify if it exceeds or is close to the recommended limit for the 2.4GHz. WiFi devices' performance might be affected if the WiFi channel is crowded or even overloaded.

 

Try to change the 2.4GHz WiFi channel to 1, 6, or 11, see if there's any improvement.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 70

Replies: 3

Tags

Smart Actions
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.