Light source after switching off offline (L630 and S112)

X13

Monday - last edited Monday

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-10-27

Light source after switching off offline (L630 and S112)

Monday - last edited Monday

Model: Tapo L630

Hardware Version: V1

Firmware Version: 1.1.2

Hello, I have equipped my lamp with T630 bulbs and also use an S112. The S112 is connected as specified and permanently connected to the power supply. I have added the T630 in the app and can control everything. When I switch on the lamp once using the light switch, the bulbs go offline and are no longer accessible (I then have to add the bulbs again individually).

I can switch the light on and off using the app, but I cannot select/adjust any settings or scenarios. What am I doing wrong?

1 Reply

Wayne-TP

Yesterday

Posts: 7241

Helpful: 1151

Solutions: 2554

Stories: 13

Registered: 2020-06-23

Re:Light source after switching off offline (L630 and S112)

Yesterday

@X13

We actually don’t recommend using a smart switch to control a smart bulb. When the smart bulb is turned off by the smart switch, it loses its power connection and smart functionality, so you can't control it via the app until it is powered back on and reconnects to Wi-Fi. In your case, it appears that the bulb was reset due to the power switching, so you will need to re-add it to the app in order to control it again.

The recommended approach is to use a smart device to control a non-smart device, in this way, both devices will not conflict with each other during operation.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!

Light source after switching off offline (L630 and S112)

Light source after switching off offline (L630 and S112)

Information

Voters 0

Tags