@retro_ 

the ke110 is not following the smart control shedule sometimes after I changed the temperature manually and the next smart control setting is reached.

And often I cannot even change the temperature manually. The ke110 often switching right back to the temperature that was set before the manual change. So I have 2 problems with it.

I have the same issue.  Tapo / Kasa  KE110 not following the Smart Schedule. I have two that are not following the schedule. The Signal appears to be strong and inteference free. I have some more KE100s and they appear to follow it fine. Its just when the KE110 is involved.  Come on TAPO / Kasa fix it with a firmware update.

 I have the same problem, ke110 won't always follow the schedule. I had to unlink my ke110 and set the intelligent schedule directly on the ke100. I have two ke110, one is quite close to the kh100 hub, both will sometimes not follow the schedule. Waiting for firmware update :-(

  @Wayne-TP 

Same here , they are not following the schedule I have also window sensor and it is working fine if it helps but ke110 I have 4 of them and I am really exhausted of checking them every 1-2 hours to see if they are correct or not. Everyday I have at least 2 cases that they are not following the schedule sometimes I see hold even time comes and passes sometimes I see tvr sync mismatch even I didn't do something. These are not some smart bulbs that if not working correctly it is still not a big deal but  these are for heating and need to be rock solid

Already sent mac addresses please release beta firmware so that I will update current firmware of ke110 are all 1.1.0 , also please inform us about the final release time expectation

I have updated to beta version it is much better but still having random problems especially with the open window detection.

Here is my recommendation to anybody having similar problems.

if you really want to use smart schedule from the device itself means temps are trigerred locally and you are changing let's say 3 rooms temperature at the same time put 5-10 minutes in between the rooms temp changes so that hub can sent quarries one at a time.

My real recommendation is  switching everything completely off both smart schedule and window detection from the device page  but instead defining smart routines to replace them. Routines are working flawlessly on both firmwares normal and beta for me. Also routines has more flexibility. Downside is you are now bound to internet and routines are triggered by cloud itself. if you gave an Internet conncetion problem routines will not be triggered. Currently I defined 15 routines for 4 rooms including window detection