@retro_ 

the ke110 is not following the smart control shedule sometimes after I changed the temperature manually and the next smart control setting is reached.

And often I cannot even change the temperature manually. The ke110 often switching right back to the temperature that was set before the manual change. So I have 2 problems with it.

I have the same issue.  Tapo / Kasa  KE110 not following the Smart Schedule. I have two that are not following the schedule. The Signal appears to be strong and inteference free. I have some more KE100s and they appear to follow it fine. Its just when the KE110 is involved.  Come on TAPO / Kasa fix it with a firmware update.

 I have the same problem, ke110 won't always follow the schedule. I had to unlink my ke110 and set the intelligent schedule directly on the ke100. I have two ke110, one is quite close to the kh100 hub, both will sometimes not follow the schedule. Waiting for firmware update :-(

  @Wayne-TP 

Same here , they are not following the schedule I have also window sensor and it is working fine if it helps but ke110 I have 4 of them and I am really exhausted of checking them every 1-2 hours to see if they are correct or not. Everyday I have at least 2 cases that they are not following the schedule sometimes I see hold even time comes and passes sometimes I see tvr sync mismatch even I didn't do something. These are not some smart bulbs that if not working correctly it is still not a big deal but  these are for heating and need to be rock solid

Already sent mac addresses please release beta firmware so that I will update current firmware of ke110 are all 1.1.0 , also please inform us about the final release time expectation