Smart Home Community > Tapo Smart Light Bulb > One L535 involves a local smart action, but other L535 exact same version and firmware does not
< Tapo Smart Light Bulb

One L535 involves a local smart action, but other L535 exact same version and firmware does not

One L535 involves a local smart action, but other L535 exact same version and firmware does not

One L535 involves a local smart action, but other L535 exact same version and firmware does not
One L535 involves a local smart action, but other L535 exact same version and firmware does not
Monday
Tags: #Smart Actions #Tapo App Related
Model: Tapo L535E  
Hardware Version: V3
Firmware Version: 1.1.8 Build 240708 Rel. 165207

Automation 1: When motion (T100 + H200) detected, turn on a L535  => local action

 

Automation 2: When motion (T100 + H200) detected, turn on other L535  => NOT local action ¿why could this be?

 

I even tried using the same T100. It is never a local action.

Editing "Automation 1" using the same T100 as "Automation 2" is still a local action.

The only difference is which light bulb they are tuning on.

 

I don't understand what's happening, because both L535 have the same hardware version, the same firmware, and they even were bought together. Why for this particular L535 its automations are never local?

 

Thanks

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:One L535 involves a local smart action, but other L535 exact same version and firmware does not
Wednesday

  @hhh3 

 

When creating a local smart rule, all the involved devices must be connected to the same network (subnet). If any device is located in a different network, the local smart rule cannot be created successfully.

 

Are there two bulbs connected to the same WiFi? Pay attention to the guest WiFi, iot network, or the WiFi signals created by network extension devices. For example, it will be a problem if one device is in the main network while the other is in an isolated guest wifi.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:One L535 involves a local smart action, but other L535 exact same version and firmware does not
Yesterday - last edited Yesterday

  @Wayne-TP 

>Are there two bulbs connected to the same WiFi

Yes. Actually, one is physically next to the other.


I thought rebooting everything (router, hub h200, and turned off and on again the light bulbs) would fix the issues… but the effect was the exact opposite.
 Now all the configured actions, except for one, are no longer local, and I can't create or update any new local actions. I have no idea what's happening here. It just rebooted, and now, not only is that single action wrong, they are all wrong! (except for one). This is for everything, not only the L535 light bulbs.

 

  0  
  0  
#3
Options
Re:One L535 involves a local smart action, but other L535 exact same version and firmware does not
8 hours ago

  @hhh3 

 

What's the firmware version of your Tapo H200? How many H200 do you have? Do you have other Tapo hubs?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 47

Replies: 3

Tags

Smart Actions Tapo App Related
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.