Solution Fixes: Smart Control Not Working on Kasa KE110 and Linked KE100
This Article Applies To
- KE110(EU) V1.0 - Firmware 1.1.0 Build 250225 Rel.192437
- The KE100 that is linked with the KE110
Description
When linking a KE100 to a KE110, you may find that the Smart Control settings on the KE100 do not work as intended. For instance, the target temperature may not adjust according to the schedule, and heating may continue based on the previous plan even after a new schedule is set to begin.
Workaround
R&D has developed new firmware that addresses this issue. Before the official release, community users are provided early access to the firmware. If you would like to have a try, follow the instructions below to apply the firmware.
How to Apply Beta Firmware
1. Find the Mac address of the KE110 and the connected KH100 hub: Open the Kasa app and navigate to the smart device's Device Settings page > Device Info.
2. Send a private message to @Wayne-TP with this format:
[KE110 Smart Control Issue] + Mac address of your KE110 and the KH100
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update firmware of Kasa smart devices
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Darek903 wrote
Hello Wayne,
I do not know if I am doing something wrong or my devices did not receive new firmware.
I do not see updates. Kasa software says that firmware is up to date.
Currently on KE110 I have 1.3.0 and on KH100 I have 1.6.7 version.
Check your message to confirm the beta firmware version. If device's auto-update feature is enabled, the update will be automatic once a new firmware is detected.
- Copy Link
- Report Inappropriate Content
@Alexder @muehlauer Beta firmware has been sent to your devices, you may check it 30 minutes later in the Kasa app and perform the update.
- Copy Link
- Report Inappropriate Content
Hello,
I have multiple KE110 connected to KH100. Can I send you all MACs of KE110 together or do I have to send them separately?
Thanks in advance!
- Copy Link
- Report Inappropriate Content
@MiHaMo @96BH1 @Sebastjan_L_1 Beta firmware has been sent to your devices, you may check it 30 minutes later in the Kasa app and perform the update.
- Copy Link
- Report Inappropriate Content
@baene Beta firmware has been sent to your devices, you may check it 30 minutes later in the Kasa app and perform the update.
- Copy Link
- Report Inappropriate Content
Hi, I'm having constant problems with smartcontrol with linked KE110 and the KH100. I've sent you a private message with my MAC addresses. Thanks in advance.
- Copy Link
- Report Inappropriate Content
@Waldi2k1 Beta firmware has been sent to your devices, you may check it 30 minutes later in the Kasa app and perform the update.
- Copy Link
- Report Inappropriate Content
Same problem for me. Please see PN.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@MKExec @Stuart-TP @Jones16v @Dresa91
Beta firmware 1.1.0 Build 260106 Rel.62397n has been sent to your devices, you may check it 30 minutes later in the Kasa app and perform the update.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 976
Replies: 21
Voters 0
No one has voted for it yet.