Solution Fixes: Smart Control Not Working on Kasa KE110 and Linked KE100
This Article Applies To
- KE110(EU) V1.0 - Firmware 1.1.0 Build 250225 Rel.192437
- The KE100 that is linked with the KE110
Description
When linking a KE100 to a KE110, you may find that the Smart Control settings on the KE100 do not work as intended. For instance, the target temperature may not adjust according to the schedule, and heating may continue based on the previous plan even after a new schedule is set to begin.
Solution
This issue has been resolved via a firmware update. If you are experiencing similar problems, please ensure both your devices are updated to the fixed version, as listed below.
- Kasa KE110: 1.4.0 Build 260330 Rel.011701
- Kasa KH100: 1.7.5 Build 260304 Rel.032022
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
96BH1 wrote
hi wayne,
i have tried to create new topic, but for an unknown reason, there is every time note: Please enter the corresponding text according to the type of language. - which is funny / have no idea what language TP-Link prefers... :D
so please excuse myself I am paste my current issue here:
Hi guys,
I am experiencing a confirmed firmware issue with the KE110 thermostat and KH100 hub.
After latest app SW update a full reset of KE110, KE100 and KH100, deleting all Smart Control schedules and creating new ones, the KE110 immediately switches to 30°C as soon as it pairs with the KH100 hub.
This happens consistently and is fully reproducible.
Thank you for any help!
Roman
The 30℃ reading you’re seeing is likely because you adjusted the temperature in 0.5℃ increments. This feature isn’t officially supported on the KE110 yet, so using it could lead to unexpected behavior or issues.
I've sent a new beta to your KE110 and KH100, which should resolve this issue.
PS: You may edit the comment to remove your device's information.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This all is a joke right ? How long is this gonna be the way to get this crap working correctly? @Wayne-TP
- Copy Link
- Report Inappropriate Content
Modellbobby wrote
This all is a joke right ? How long is this gonna be the way to get this crap working correctly? @Wayne-TP
The official fix has been released. Update both your KE110 and the KH100 to the latest firmware, and the problem will be resolved.
- Copy Link
- Report Inappropriate Content
Hello everyone!
The issue discussed in this post has been addressed in the latest firmware.
If you are experiencing similar problems, please ensure your devices are both updated to the fixed version, as listed below.
- Kasa KE110: 1.4.0 Build 260330 Rel.011701
- Kasa KH100: 1.7.5 Build 260304 Rel.032022
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 10016
Replies: 65
Voters 0
No one has voted for it yet.