Home Network Community > Deco > Deco x50 5G se ha restablecido de fábrica solo
< Deco

Deco x50 5G se ha restablecido de fábrica solo

Deco x50 5G se ha restablecido de fábrica solo

Deco x50 5G se ha restablecido de fábrica solo
Deco x50 5G se ha restablecido de fábrica solo
a week ago
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.3.1

Buenos dias

mehe levantado esta mañana y he visto que toda la red estaba caída. Pensé que era mi servidor que fallo. Pero al comprobar ip vi que me estaba asignando la 192.168.68.x cuando la mía es 192.168.1.x. También me ha cambiado el nombre de la red y del wif por TP LINK y contraseña por defecto. 
los Deco x50 repartidos por la casa están en verde como con línea pero no están en la red. También me ha borrado todas las configuraciones incluido los 50-100 reservas de direcciones. 

  1      
 
  1      
 
#1
Options
2 Reply
Re:Deco x50 5G se ha restablecido de fábrica solo
Monday

  @Almogu 

Hi, thank you very much for the feedback.

It is very likely that there might be an IP conflict detected, which forced Deco to reconfigure the network and caused a series of subsequent problems.

Have you already changed the LAN IP address and WiFi SSID back to the original settings?

If you've saved the system logs, it is also suggested to send an email to https://www.tp-link.com/es/support/contact-technical-support/#Hotline-Support, and add a copy of the web UI system log.

Thanks a lot.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco x50 5G se ha restablecido de fábrica solo
2 hours ago

  @David-TP 

Yes, I put everything back as it was since my network does not use that address so everything I had with static ip stopped working. All the home automation servers etc. the router was re-established from the factory since it even lost the connection with the Deco, the address reservation was deleted, everything deleted. I didn't keep a log since the main thing was to reset my network not to see why a high-end thing fails.

  0  
  0  
#3
Options

Information

Helpful: 1

Views: 35

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.