Wlan von der 4.Etage in den Keller
Hallo zusammen,
habe zwei TL-PA4010P die ich miteineinder über das Stromnetz koppeln wollte um mein WLan-Netz zu verstärken.
Einen an meinen Router (4.Etage) und den anderen im Keller.
Vorher habe ich beide in meiner Wohnung gekoppelt. Bin dann in den Keller und habe einen Rechner an den Ethernet angeschlossen. Hat alles geklappt. Leider wird im Keller kein WLan-Netz aufgebaut, damit ich meine Shellys dort ansprechen kann.
Habe über einen Tip den TL-MR3020 geholt und im Keller mit dem TL-PA4010P verbunden leider wird mein WLan-Netz dort nicht erstellt.
Habe den Schalter auf AP gesetzt.
Was mache ich falsch oder muß ich einderes Gerät holen um mein WLan-Netz in den Keller zu bekommen?
Gruß Holger
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @HKaufmann ,
Welcome to our community.
To clarify: The TL-PA4010P devices are pure powerline adapters without Wi-Fi capability; they only extend the wired network connection over the electrical wiring. To have Wi-Fi in the basement, your approach of connecting a separate Wi-Fi router (TL-MR3020) in AP mode is fundamentally correct.
Before using the TL-MR3020, confirm that the second TL-PA4010P can connect normally to the first TL-PA4010P (the one connected to the Vodafone router) in the basement.
If network access can be obtained from the second TL-PA4010P after testing other wired devices, further verification is needed to confirm whether the TL-MR3020 is correctly configured in access point mode: How to Configure the Access Point Mode on the TL-MR3020 and TL-MR3040
Best Regards.
- Copy Link
- Report Inappropriate Content
Der Router ist ein Vodafone Station.
- Copy Link
- Report Inappropriate Content
Hello @HKaufmann ,
Welcome to our community.
To clarify: The TL-PA4010P devices are pure powerline adapters without Wi-Fi capability; they only extend the wired network connection over the electrical wiring. To have Wi-Fi in the basement, your approach of connecting a separate Wi-Fi router (TL-MR3020) in AP mode is fundamentally correct.
Before using the TL-MR3020, confirm that the second TL-PA4010P can connect normally to the first TL-PA4010P (the one connected to the Vodafone router) in the basement.
If network access can be obtained from the second TL-PA4010P after testing other wired devices, further verification is needed to confirm whether the TL-MR3020 is correctly configured in access point mode: How to Configure the Access Point Mode on the TL-MR3020 and TL-MR3040
Best Regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 96
Replies: 3
Voters 0
No one has voted for it yet.