Tapo-App Export all "app-known" devices data at once to CSV.

 

At least all network settings which are active, to monitor and manage network, gateways and router.

 

At least is should be:

IP address, MAC address, Gateways, Netmask, used DNS ,Hostname , Ports, Url which can be used to access streams.

 

..may be Important because local network firewall:

What the device IP and path to set by Firewall to make it work with AI, Cloud (if used) 

and even get to it by Mobile communication devices/Smartphones. May be http tunnel or something.

Should be known.

 

 

..i also like to have

Used Access data:  ID and password.

Every name/e-mail which a device is shared to.

 

..nice to have

All used control-settings accessible by app.

(may be to restore it by hand ? no idea. Just nice to have)

 

..nice to have:

Video control data: Link compression settings, codecs which are used, data of A/V-stream parameters.

Onvif accessible map (and what is to manage or locked) and names and set parameters.

 

also very nice to have:

All hardware data like optical resolution of sensor, sensor modes, may be sonsor name, modes and so on.

 

..another nice to have:

Timetables the device will be used and from what automatic by name, 

may be the hole automatic table.

 

Short: All what you can assign to a device. And everything, what is not supported by a Model should be marked "Not available".

Max be category could be selected which to export.

 

Did i forgot something ? I really would love that table. 
thank you

 

note:

It can be done by hand, read everything out of the app and or arp/routing tables,

wireshark and so on.

 

BUT, i use to have 6 different tp-link cameras

(next coming soon if its lower priced somewhere again),

10 smart plugs ,3  Smart shutter controller.

So i got to spend hours to collet data.

 

Even worst, if a device is out of range in a moment or not connected.