Smart Home Community > All Threads > HS110 (EU) died do not power up
< All Threads

HS110 (EU) died do not power up

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS110 (EU) died do not power up

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS110 (EU) died do not power up
HS110 (EU) died do not power up
2020-10-18 11:32:29 - last edited 2020-10-20 08:47:51
Model: HS110  
Hardware Version: V3
Firmware Version:

Got 10 HS110/100, working fine. However, today one of the HS 110 was no longer connected to the app. It is no longer turning on, that is, no light in the on/off switch, Tried several other outlets, that other HS110 respon and turns on from.

So, question is, is there any trick to get it back in life, or has it just become a dead electronic device with no more hope? (S/N 218C317004395)

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:HS110 (EU) died do not power up-Solution
2020-10-20 08:41:58 - last edited 2020-10-20 08:47:51

@Leafnor 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

Have you tried to reset the HS110 by holding the system button for 10s to do a factory reset to see If that helped?

After reset, if still nothing happened, you might need to contact the shop retailer to ask for the warranty.

 

Thanks a lot.

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:HS110 (EU) died do not power up-Solution
2020-10-20 08:41:58 - last edited 2020-10-20 08:47:51

@Leafnor 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

Have you tried to reset the HS110 by holding the system button for 10s to do a factory reset to see If that helped?

After reset, if still nothing happened, you might need to contact the shop retailer to ask for the warranty.

 

Thanks a lot.

Recommended Solution
  0  
  0  
#2
Options
Re:HS110 (EU) died do not power up
2020-10-20 14:53:16

@Brook 

Hi. Yes, I've tried to hold the button for more then 10s. Also the main button, and both. But as there is "no sign of life", that is no light in main buttin, I believe there is a main fault. So next tep will have to be to contact the shop I bougth it from. 

 

Many thanks. 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 928

Replies: 2

Related Articles
HS110 power consumption measurement, on cartesian axex
1087 0
HS110 does not display Energy usage and randomly power cycles
976 0
HS110 not showing POWER CONSUMPTION
3030 0
HS110 Power button functionality
1024 0
HS110 doesn’t power devices off
819 0
HS110 Doesn't Turn Off the Power
4792 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.