Tapo C520ws

Tapo C520ws

Tapo C520ws
Tapo C520ws
2024-01-23 18:20:15 - last edited 2024-02-01 06:48:02
Model: Tapo C520WS  
Hardware Version:
Firmware Version: V 1.2.5

Have just purchased the C520ws and was under the impression that power was supplied via the Cat5e connection... Have tried on a poe switch but the unit does not power up. 

It only appears to work via the power connector and wireless streaming. 

Do you have to have the power connector on and the Cat5e plugged in to be able to stream over the wired network. 

Is it a true poe camera.? 

Thanks for replies. 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Tapo C520ws-Solution
2024-01-24 07:19:31 - last edited 2024-02-01 06:48:02

  @Paul_Ozzy 

Hi,
The Tapo C520WS is not a POE camera, it can't be powered via an ethernet cable and needs to be powered by the power adapter.

 

Can you share the link that says the camera is a POE camera with us? If it's our official website, we will correct the information as soon as possible.

 

Best Regards
 

Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Tapo C520ws-Solution
2024-01-24 07:19:31 - last edited 2024-02-01 06:48:02

  @Paul_Ozzy 

Hi,
The Tapo C520WS is not a POE camera, it can't be powered via an ethernet cable and needs to be powered by the power adapter.

 

Can you share the link that says the camera is a POE camera with us? If it's our official website, we will correct the information as soon as possible.

 

Best Regards
 

Recommended Solution
  0  
  0  
#2
Options
Re:Tapo C520ws
2024-04-19 23:07:09 - last edited 2024-04-19 23:09:20

  @Paul_Ozzy I managed to power mine using this:


Active Gigabit PoE Splitter

 

  5  
  5  
#3
Options
Re:Tapo C520ws
2024-07-14 07:59:40
What setting did you use on that Splitter. It's got 3 settings 5 9 and 12 Thanks in advance
  2  
  2  
#4
Options
Re:Tapo C520ws
2024-07-14 08:17:41 - last edited 2024-07-14 08:18:35

  @Skewett 

 

What do you think the 5 9 12 are?

 

I'll give you a clue since there wasn't a manual or guide read ;)

 

Voltage. The cw520ws is a 9v PSU so use 9 as the position for the switch

  7  
  7  
#5
Options

Information

Helpful: 0

Views: 3987

Replies: 4

Related Articles