Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
Hi there,
I have a large house and when someone rings the doorbell I need to hear a chime in multiple places throughout the house. At the moment I only have one H200 hub which chimes and that too for a very short time. Is it possible to have multiple H200 hubs throughout the house that will all chime when the doorbell is pressed or some other solution to this problem? This is a fundamental requirement that many people must have.
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can refer to this guide. How to add another chime for the Tapo D230 when pressing the doorbell button
- Copy Link
- Report Inappropriate Content
Hi @Narada
I've just had a quick look at my setup to check, and I believe this works.
Whilst this may not be possible under 'paired chimes' for the doorbell itself, you *could* I think create an automation.
i.e;
Trigger -> When doorbell X is pressed
Then -> Activate hub chimes A, B and C
You could even the set different time slots. e.g. 8 till 8 ... ring every hub in the house. After that point (via a different automation), only ring the ones downstairs.
Not ideal, but it may at least function.
HTH
TG
- Copy Link
- Report Inappropriate Content
You can refer to this guide. How to add another chime for the Tapo D230 when pressing the doorbell button
- Copy Link
- Report Inappropriate Content
Thank you all. I will try your suggestions.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 59
Replies: 3
Voters 0
No one has voted for it yet.