Problem NC250 - Device disconnected with cloud server
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem NC250 - Device disconnected with cloud server
Model :
NC250 1.0
Hardware Version : V1
Firmware Version : 1.0.10 Build 160321 Rel.27531
ISP : ATT
Situation:
Adding a new NC250 in a network with Router D-LINK DIR-857, conect to ethernet and using TPCamera APP and all work fine, unplug network and use Wifi.
In the Same Network have another 8 Cameras NC200
Issue:
In some minutes or hours, the Camera NC250 appear as NO CONNECTED in the TPCamera APP (Offline). Reset and again re-install.
But all time happend the same, Offline.
In the LOG appear all time the INFO:
All time
In the CLOUD send:
Cloud Setting
Cannot connect to the TP-LINK Cloud server.
Please check your network or try again later.
Another LOG issue:
Any idea?
Thanks
Hardware Version : V1
Firmware Version : 1.0.10 Build 160321 Rel.27531
ISP : ATT
Situation:
Adding a new NC250 in a network with Router D-LINK DIR-857, conect to ethernet and using TPCamera APP and all work fine, unplug network and use Wifi.
In the Same Network have another 8 Cameras NC200
Issue:
In some minutes or hours, the Camera NC250 appear as NO CONNECTED in the TPCamera APP (Offline). Reset and again re-install.
But all time happend the same, Offline.
In the LOG appear all time the INFO:
| [2016-12-10/01:08:06] | Cloud | INFO |
Device disconnected with cloud server. |
All time
In the CLOUD send:
Cloud Setting
Cannot connect to the TP-LINK Cloud server.
Please check your network or try again later.
Another LOG issue:
| [2016-08-08/06:00:17] | Cloud | ERROR | P2P dameon run failed |
Any idea?
Thanks