@Avieck Hey You will need to setup port forwarding (also called Virtual Servers) under NAT on the router. This will allow the connection from external to be forwarded onto the device you require....

@Acqua1 One of the advantages I could see an ER605 having for you is VLANs. As you are getting the Switch, Controller and APs you could separate the guest traffic completely from your own private...

@Shoresy Yeah if its only for a few mins to update then you should be fine :) As you say the APs will reload to refresh the settings once the controller touches them again, this will drop the...

@Sparky1uk Hey Im not fimiliar with the X20 specifically but have used other Deco ranges and had this issue, hopefully its the same one you are having! Thinking it could be the wireless encryption...

@Toastandjam1 Try putting http://192.168.1.1 rather that just 192.168.1.1 Browsers usually try to add a HTTPS (secure) to the start if you just use the IP address, telling it its a standard HTTP may...

@Shoresy The effect a loss of controller will have on the AP or APs is depending on the circumstances, from my testing anyhow If its just a single AP that loses connection to the controller, the...