@smatom The first thing i would try is to see if you can actually see the Printer on the network from the MAC. Be that via PING or going to the IP and looking for the web-interface, that would rule...

@ca_martin82 Have you got a cable running from deco to deco? or are these connected completely WiFi? If you are working in AP mode then it needs a cable, Router mode doesnt and uses WiFi instead.. if...

@smatom Quick question Are you using the Router / ISP Modem WiFi along with the Deco? Namely are some devices connected to the Deco and some to the Router? If so that could be the issue as you are...

@SMario Ah thats unfortunate, least you got to the bottom of what it was! Hopefully swop out and all good!

@loopin3 This can take a good few mins to apply, sometimes even a reboot of the Router. Generally it does work eventually but when making changes I tend to reboot to apply them

@Kalvin88888 The certificate can be used for as many clients as you wish, this is controlled by the limitations of the Gateway itself. In terms of the ER605 for example, this is 10 OpenVPN Clients,...