@Alex789 Hey Did you try jacking into the controller via the 2nd LAN port? That might let you into it directly via IP at which stage you can forget the switch then reset that way, manual IP on the...

@btx Totally agree mate.. CCA is a disaster waiting to happen but sadly I have seen it before! Contractor comes in 10% cheaper cause he is using what appears to be copper coloured cable, its alu core...

@VNZ Port 1900 is indeed UPNP To my knowledge, the Deco M5, M9 and X range have the option to disable UPNP under Advanced in the App. However, I do not think this is possible on the P9 Is there a...

@JohnAaronRose If you are looking to run a server, then yes you would need to have Port Forwarding, Port Triggering would not suffice. In terms of VPN, its depends on where you wish to terminate the...

@johnsnow88 If you are running multiple APs, then try disabling the Private MAC address setting on the phone for you SSID. I had a customer that had all sorts of issues similar to you and that...

@TSK-IT Un-Meshing can be done if you cable the AP into the LAN, when controller detects a LAN connection it should remove the mesh in favour of the cable connection. Outside that the only other way...