@H7FM I would recommend doing this via an ACL I have some services and ports blocked via ACL and it works fine :) Under Settings Profiles, create a new group > IP group and add port 80, 443 Under...

@jjj42 Hey This has been asked a number of times, sadly the EAP Wall units are unlikely to ever get roaming enabled, this is by design The Wall units are designed for dormitories / hotel rooms where...

@Lasermatrix Hey Im assuming by Gateway you are referring to an ISP router or something similar? If so then you can install a load balancing router (something like the TL-R605) and it will handle up...

@AndreMartins Try manually logging into the AP while its not adopted and do the downgrade from there. I have seen that warning before when downgrading via the controller and that was how i got by it

@AndreMartins You could try downgrading them again to 5.0.2 and see if the issue disappears? Could be a new issue in that firmware, however I have upgraded also and not experienced this on the 245s I...

@MarkB Personally, I wouldnt jump to turning off band steering or roaming until you know the IPerf results. Without knowing where the bottleneck / slowness is here you are just randomly shooting in...