@AsadulHuq Hey Provided that the Main Deco can get a DHCP address from the Cable, then in theory this should work The Deco will create a new LAN on the subnet 192.168.68.x range when setup

@AsadulHuq Hey Open the App and at the top where it says your SSID name, select the drop down adn choose CREATE NEW NETWORK You can then set this up as a second network with the new Deco Hardware.

@Christian2705 I am experiencing the exact same, no stats since the upgrade. Attempted a full reboot this morning, did not help

@SMwireless When you adopt a device into the controller for management it removes the old user acccount, you have no access to the new "adopted" details. If its asking you for credentials then it has...

@Ameo Hey Yes that should work for you OK, just configure it as an access point outside your house and should be fine When you say AC1200, is your current AP an EAP245? If so you could add a...

@dvortsov Happy days! Glad that worked for you! Likely they both use the same type / vendor of wifi card and its very basic at best. Long as it works :)