@PBGBBB2020 OK so im guessing the V5.00 is the firmware on the AP (EAp225) so that fine and upto date.. however it does require v4 of the SDN to work Im guessing when you check for updates on the...

@dibu See to be honest, the only one you need is this.. just ignore the rest (I do) Controller Version: 4.1.5 - this is the software version of the SDN you are running and all you really need to know...

That could be the root of your problems :)

@Nevian900 Ah in that case its somethign else handing out the Ip addresses, connecting to 192.168.1.1 should give you some idea. Try disconnecting everything else till this changes :)

@PBGBBB2020 AH Omada SDN on a PC, I see its there and connected, but I don't see any performance data (no bytes transferred) and it shows 0 clients connected, even though I know at least 10 are...

@mobile75 Hey Think I follow you ok If you are asking, personally I would keep the new ROUTER on a separate range. Something like 192.168.10.1 Then just allow it to route the data to WAN 1 and WAN 2...