@PBGBBB2020 This is just how the 2x different vendors implement the WiFi protocols. At at guess they are using the exact same protocol and configs for the 2.4 (as its old and not used much now) but...

@PBGBBB2020 1) Does creating a second SSID broadcast on the eap225 for just iot devices help? Or does it not matter since both SSID are in the same queue since its through the same AP and its...

@TP_VR400 Umm thats curious Try switching it to Channel 153 or 157 and set for 40mhz and retest this.. If that works try 80mhz You are using 36 at present which is the default for most ISP routers so...

@PBGBBB2020 You are always going to get Dropped and Retry packets. Anything less than 30% retry is normal, 60% heavy and should be investigated.. Drops should only be a few % at most (3 / 4%) Those...

@PBGBBB2020 Hopefully some answers for you :) 1) Sometimes the EAP connection drops out. One minute I can get max speeds, the next it is weak; like 10% of max speeds. This is without moving...

@TP_VR400 Try dropping the channel width to 20mhz and setting the security type for WPA2 AES If that works increase the width to 40 test 80 test