@Otavio_Rievert Double check your phase 2 setting - you have DH14 selected as phase two but Mr.S recommended DH5 of phase 2 Also, do you have the ER605 as the Initiator ? its just set as responder in...

Hi Everyone I wanted to give you my experience of being in this program for almost a full month now - I have been “Alpha Testing” the Alpha Testing program! This is a great opportunity to have your...

@Ethan-TP Hooray! Temperature reported to controller is now back to what it was pre 1.3.0 (which is correct, all FW post 1.2.3 were 7-8c higher than what it should have been) So far, so good. Also,...

@NeilR_M This is only achievable with Switch ACLs currently, Gateway ACLs do not yet support IP Groups If you dont have the ability to add a switch ACL, you can achieve this by creating another VLAN...

@NeilR_M What are the numbers of manageable Gateways, Switches and EAPs of this controller? it isnt listed in the datasheet like the other models

@ZoloNN If you switch from SD-WAN to IPSec (but will have to build all the inter-site VPNs manually) you can change the DPD timeout or disable it entirely which might help with this situation