@Pruthvi_07 Thats an awful lot of macs to block, I dont think you can do this in that way. Im not even sure if there is a way with that many. If they are sequential, you can possibly add them to a...

@SCPI_MIS Sounds like a rogue DHCP server on the network somewhere! 192.168.11.X is not a default IP range of any brand that i am aware of, so somehtign is handing that out specifically find it, kill...

@nurix Switches will only have IP addresses on the management VLAN, and any other vlan you have defined a virtual interface for Top arrow is my management interface (natural switch IP as shown in...

@GRL I needed to make some changes tonight, so rebooted the network after. My WAN.LAN2 SFP+ is not-operational again. I will leave it like this until tomorrow incase anyone at TP-Link wants to remote...

Managed to catch mine in the LAN2 SFP+ non-working state after doing a test power-cycle tonight No weird configs on the port Its just...off. Disabling and Enabling on the port config screen doesnt...

@MR.S It has only hapenned to me 3 times since the april 1.3.0 build. I have restarted it a bunch of times when i first noticed the issue and 90% of the time it comes back up. Today it failed again -...