10148576 wrote How to use "tplink 1600G-28ps" to implement "one-arm routing to achieve communication between different VLANs on the same switch" You define the uplink from the switch to the router as...

@Don_A, OC200 needs a PoE adapter according to IEEE 802.3af PoE if you want to power it through PoE. Those adapters always have a voltage of ~48V and a power rating of max. 15.4 watts (including...

XelNika wrote @forrest Which features exactly? First of all, DNS also uses 53/TCP which is blocked. Second, there should be no need for DNS to connect to an AP. In my opinion ACLs and the Guest...

@XelNika, I can confirm this at least for hosts in the wired network, did not test with wireless hosts so far.

Hello Forrest, I have the same issue with EAP225 V3 running firmware V2.6.1, downgrade to older versions is not possible anymore: Even through the built-in web UI of the EAP I can't downgrade:

@forrest, I fully agree that it is the best solution to use a DHCP server for initial setup, even if it only runs temporarily until the EAPs have been configured. Just forgot to mention this in the...